Blowback Bolt Weight: Difference between revisions
No edit summary |
|||
| Line 50: | Line 50: | ||
|Gevarm A6 | |Gevarm A6 | ||
|205 | |205 | ||
|Open Bolt | |||
|- | |||
|9x19 | |||
|Sterling | |||
|210 | |||
|Open Bolt | |Open Bolt | ||
|} | |} | ||
Revision as of 03:18, 6 February 2026
Introduction
Bolt Weights
This list contains the measured weights of actual production-gun bolts that are proven safe.
The weights refer to the complete bolt assembly without the charging handle and recoil spring.
| Caliber | Gun | Bolt Weight (gram) | Action Type |
|---|---|---|---|
| 9x19 | Sten MK2 | 630 | Open Bolt |
| .45 ACP | M3 "Grease Gun" | 880 | Open Bolt |
| 9x19 | Uzi | 660 | Open Bolt |
| 9x19 | F1 | 700 | Open Bolt |
| 9x19 | Owen | 670 | Open Bolt |
| 9x19 | MP40 | 650 | Open Bolt |
| .22LR | Voere 2005 | 210 | Open Bolt |
| .22LR | Gevarm A6 | 205 | Open Bolt |
| 9x19 | Sterling | 210 | Open Bolt |
Advise
The best advise for designing a safe and secure bolt is to look what professional companies have designed.
Many of the formulas that circulate on the web are not quite correct.
It is also a common flaw in DIY guns to have, sometimes vastly, underweight bolts. A bolt too light is not only dangerous because it might open the chamber when there's still high pressure inside, but it also increases wear because the bolt moves back too fast.
For 9x19, a common bolt blowback mass is around 650g. This includes the bolt handle and attachments to the bolt that are part of the moving mass, i.e. the firing pin and the extractor.
For .22LR, a common blowback mass is 200-220g.